Categories
Vangaurd

Smoothing Out The Body

Now it’s time to fill all the bumps and bruises with Bondo to level them out.

I felt the body to find any dips in the wood and sanded them a bit to make rough and circled them with pencil. Then mixed up some Bondo and schmear it in.

Next it sanding off the Bondo to make everything smooth again.

Marked off areas that need to be filled.
Fill the areas with a dollop of Bondo.
After a couple hours to cure, the Bondo is sanded and suuuuuper smooth.

Next step is some final fitting /adjusting and then starting the paint!

Categories
Vangaurd

Fixing My Router Boo Boo

While I was routing the body for the Floyd Rose tremolo, my router bit slipped out of the chuck and dug in too far. It went in about 1/4″.

The boo boo was in an area that is not functional and wouldn’t be seen, but I wanted to fix it anyway. My plan is to…

  • Square up the boo boo
  • Level the bottom out
  • Make a piece of wood to fit
  • Glue in the block
  • Trim it off and smooth it out
  • Fill any cracks or gaps with bondo
The boo boo with pencil lines drawn on to square it up.
I used some sharp chisels to remove the bulk. I stayed away from the lines so I can come back and shave it down.
I cut right up to the lines.
I used my router plane to smooth out the bottom for a nice flat glue joint
I fit a small hunk of pine into the recess. I used pine because it’s easy to work with and it’s in a hidden area.
Some glue, a clamp, and a few hours will make it permanent.
A few minutes with chisels and the router plane and it is good as new. Well not like new, but a lot better than it was.
Categories
stuff

Wheelwright / Wagon Building

This guy has a business in Montana building and repairing wagons and wheels. For his YouTube channel, he makes great videos and explains everything. The process of doing what he does is fascinating.

This is the final video in his series of building a HUGE wagon.

Categories
stuff

Seriously?

Little guy does not approve of this one…

Categories
Vangaurd

Plugging Holes

I plugged all the holes in the guitar body. I don’t think I will use any of the old screw holes, plus I am moving the strap button, and the output jack is moved. Plug them all!

Also there was a screw with a twisted off head that needs to come out.

A busted screw that needs to come out. This will be a piece of cake!
The little $#¶$! was a royal pain to remove
Plug the old output jack and pickup ring screw holes
Plug the tremolo cover screws
Categories
Jokes

A Gorilla Walks Into A Bar…

A gorilla walks into a bar and asks for a beer.

The bartender slides him a beer and says “That will be $11. We don’t get many gorillas coming in here.”

The gorilla says “With the prices you charge, I’m not surprised!”