Something was missing from the Sex Panther. One of the reasons you know it works is because of the bits of real panther. My Sex Panther has no real bits. My friend suggested a way to ameriolate that and as soon as he said it, I was all in!

Internet to the rescue! I ordered a bag of panther teeth from the internet. Then I modified one to act as a tip for my toggle switch.

I wanted a way to thread the tooth onto the switch. I had to make a threaded insert for the tooth with an M4 thread. Home Depot does not carry M5 threaded inserts for panther teeth so I had to make one.

I started with the smallest brass nut I could find. Then I drilled out the hole in the nut until I got to 3.3mm and used an M4 tap to cut new threads. Then I filed the nut down until it was round and the outside was 1/4″ diameter.

I drilled a hole in the tooth to accept the post from the toggle switch. Then I drilled a 1/4″ counter bore to accept the threaded insert. I had to orient the insert in the tooth so the tooth would point down. Then I glued the insert into the tooth with CA glue.

After the glue dried I filed the sharp corners, sanded, and polished the tooth. It looks super awesome!